Self-Driving Toy Robot Car: A Proposal
Contents
Who Did what
1. Introduction
1.1Â Problem Statement
1.2Â Measurable Organisational Value (MOV)
1.3 Aims, Objectives & Scope
1.4 Proposal Structure
2. Literature Review
2.1Â Current App
Engineering
Next Generation Telecommunication Network
Table of Contents
1.0 Executive Summary
1.1 Objectives
1.2 Background
1.3 Geographic and Demographic
1.3.1 Past & Current Population
1.3.2 Population Forecast
1.3.3 Population by State
1.3.4 Aus
New Advances in Site Investigations and In-Situ Testing and Monitoring
The primary objective of a Geotechnical site investigation is to determine the ground conditions of the proposed site and quantify all possible risks posed to the development and construction of the structure or building.
Development of a 3D Printed Robotic Limb for Prosthetics
 Abstract
Â
In this project a 3D designed myoelectric prosthetic limb will be developed. The arm will be electronically stimulated, and the user will control the arm by flexing their muscles. An am
A Low Power Near Sub-Threshold Design for Large Scale Graphical Inference
The goal of this paper is to investigate new approaches in computing that can achieve circuit and system-level robustness with small power consumption and small area requirement for computation.
Sequence of Events and Probable Failure Mechanisms of the World Trade Center
This dissertation is focused on what happened on Sept 11th 2001, with the author’s analysis seeking to determine the probable events that led to the collapse of the World Trade Centre buildings.
Dissimilar Joint of Ferritic and Austenitic Stainless Steels Evalution
Abstract
Nowadays, dissimilar joint of ferritic and austenitic stainless steels have attracted the attention of many researchers. Because these dissimilar joints increase their efficiency and reduce
Effect of Embedment Ratio on Load-Transfer and Failure Mechanisms of Helical Screw Piles
List of symbols and abbreviations
Ap
area of the helical bearing plate
CSM
Cylinder shearing method
cu
undrained shear strength of soil
Dp
diameter of the helical bearing plate
Ds
diamete
Argos System: Radar, Radio Navigation and Location Systems
ARGOS SYSTEM: TECHNOLOGY AND APPLICATIONS
RADAR, RADIO NAVIGATION AND LOCATION SYSTEMS
Table of Contents
1. Introduction
2. Overview of Argos Technology
2.1 Argos’ main characteristics
2.
Finite Element Analysis of Composite Water Buffer Drum
FINITE ELEMENT ANALYSIS OF COMPOSITE WATER BUFFER DRUM
Abstract
Composite materials offer many advantages for oil and gas developments based on their low density, corrosion resistance, and excelle
EV Charging from Solar Powered Home Inverter
A proposal for controllers that modify conventional, low-cost home based inverters into solar grid connected inverters with the ability of EV battery utilization.
Wireless Data Transfer Using Light FidelityÂ
Abstract
Usage of light emitting diode (LED) is rapidly growing due to its reliability, low power consumption and high efficiency. In Visible Light Communication (VLC) system, LED is used for illumi
Boat Hull Dynamic Lift using Water Surface Impact
Abstract
This project aims to test an alternative system to generate lift. It makes use of the water surface impact to ‘hit’ the water and produce sufficient force to overcome the weight of the h
Influence of Trim Optimization on Ship Performance and Fuel Consumption
ABSTRACT
In recent years, because of increasing fuel costs and environmental issues, technology has been working intensively based on achieving vessel optimum trim to increase power saving and redu
Recording Dimensional Movements of Tennis Ball
Final report for project ‘Spotting the balls and lines: Tennis Analytics’
1. Abstract
This project was intended to create six subsystems to record two dimensional movements of a yellow table tenn
Tethered UAV Based Air Base Sense and Avoid Radar System
This research aims to answer whether it is possible to effectively use a tethered UAV integrated with a radar sensor to provide a 360 degree aerial view of cooperative and uncooperative small UAV below 400 ft.Â
Tribological Aspects in Design of Turbo-charger
Table of Contents
ACKNOWLEDGEMENT
LIST OF FIGURES
ABSTRACT
OBJECTIVE OF THE REPORT
1. INTRODUCTION
2. EXPLODED VIEW OF TURBOCHARGER
3. KEY AREAS OF TRIBOLOGICAL FAILURES
3.1 Compressor Unit
3.1.1
Solar Flares: Mechanics, Terrestrial Effects, and Engineering Considerations
This report focuses specifically on solar flares – a phenomenon that are a result of the sudden conversion of magnetic energy into thermal energy.
Design and Fabrication of a Go-kart
A project to design and fabricate a go-kart. Design of the Go-kart is based on the rules and regulations, set by the event organization, Imperial Society of Innovative Engineers.
CFD Modelling and Analysis of Air Flow Around Lorry
Content
Project Description
Summary
Nomenclature
Introduction
Literature review
Background of CFD
Procedure of CFD analysis
Pre-processing
Solver
Post-processing
Basic Theory of CFD
FVM (Finite Volum
